Services
Thermoplastic pavement markings
Long-lasting road lines, stop bars, crosswalks, arrows and legends for commercial property and roads across Florida and South Georgia. Used where traffic wears paint out too fast.
What it is
A plastic marking that is melted onto the pavement
Thermoplastic is a plastic marking material. It is heated until it softens, then it bonds to the pavement as it cools. The result is a thick, solid marking, not a thin coat of paint.
It usually has glass beads in it and on its surface. The beads reflect headlights, so the marking shows up at night.
Because it is thicker than paint, it takes more traffic before it wears through. That is why it is a common choice for road lines, stop bars and crosswalks.
Where it makes sense
Put it where tires cross the marking all day
Thermoplastic earns its cost in the spots that get driven over most. On most properties that is a short list.
Road center and edge lines
Private roads and community roads in HOAs, apartment communities, business parks and campuses.
Stop bars
Every car brakes and turns on a stop bar. Painted ones are often the first marking to fade.
Crosswalks
Markings that drivers need to see clearly, day and night, where people walk across traffic.
Arrows and word legends
Turn arrows, STOP, ONLY and similar legends in drive lanes, where wheels pass over them constantly.
Entrances and exits
Driveway aprons and the first stretch off the street, where all of the property's traffic funnels through.
Other high-traffic spots
Drive-thru lanes, main drive aisles and truck routes, where paint needs redoing most often.
Thermoplastic or paint
How it compares with traffic paint
Both have a place, and many properties use both. The short version: thermoplastic costs more up front and typically lasts several years, where paint on a busy lot typically lasts 1 to 2 years.
| Compare | Traffic paint | Thermoplastic |
|---|---|---|
| Cost | Lower cost up front. | Costs more up front. |
| How long it lasts | Typically 1 to 2 years on a busy lot. | Typically several years, often a few times longer than paint. |
| Night visibility | Shows up well when fresh. Fades as it wears. | Glass beads reflect headlights. |
| Best uses | Parking stalls, curbs, fire lanes, lots that get sealcoated on a regular cycle. | Road lines, stop bars, crosswalks, arrows, legends and entrances. |
When paint is the better choice
We do not push thermoplastic where paint does the job. If paint fits, the proposal will say so.
- Parking stall lines. Cars park on them more than they drive over them, so paint holds up well.
- Lots on a regular sealcoating cycle. Sealer covers the markings, and everything is restriped afterward anyway.
- Layouts that may change, such as a re-tenanted building or a planned reconfiguration.
- Pavement that is due for major repair or repaving soon.
- Curbs, and interior floors such as warehouses and garages.
- Jobs where the budget needs to cover the whole property now.
Preformed thermoplastic
Symbols and legends that arrive ready to place
Preformed thermoplastic comes from the factory already cut to shape: arrows, letters, symbols and lengths of line. The pieces are set in position on the pavement and heated until they bond.
The shapes are consistent from one to the next, and the edges stay crisp. It is a good fit for a handful of markings on a property, without setting up for a full road job.
Common preformed markings
- Turn arrows and straight arrows
- Word legends such as STOP and ONLY
- Stop bars
- Crosswalk bars
- Accessible parking symbols
- Speed limit and other numbers
- Bike lane and pedestrian symbols
How the work is done
Clean, lay out, heat, reopen
It starts with a free site visit and a written, itemized proposal. On the day, the work is done in sections so the property stays open.
Clean, dry pavement
The surface is cleaned of dirt, sand and loose material. Thermoplastic will not bond to a damp or dirty surface.
Layout
Lines and markings are measured and marked out first, to match the existing layout or your site plan.
Applied with heat
The material is heated and applied, or preformed pieces are set and heated in place, so it bonds to the pavement.
Open to traffic
Thermoplastic hardens as it cools. The area is ready for traffic soon after, and we reopen each section as it is finished.
Common questions
Thermoplastic questions we hear
How long does thermoplastic last?
Typically several years, often a few times longer than traffic paint, which typically lasts 1 to 2 years on a busy lot. The exact life depends on how much traffic crosses it and the condition of the pavement under it. We will tell you what to expect for your property after we see it.
Is it worth the extra cost?
In high-traffic spots, usually yes, because you are not paying to repaint the same marking again and again. For parking stall lines, usually no. Paint is the better value there.
Should the whole parking lot be done in thermoplastic?
Rarely. A common approach is thermoplastic for stop bars, crosswalks, arrows and entrance markings, and paint for the stalls. The proposal lists each one separately so you can see the difference.
How soon can traffic drive on it?
Soon after it cools and hardens. That is much quicker than sealcoating, which usually needs 24 to 48 hours before cars return. Ask us how each section will be reopened when we walk the property.
Do you have to close the road or the lot?
Not all of it. The work is done in sections, with one lane or one area closed at a time, so the property stays open.
What happens if it rains?
Thermoplastic needs dry pavement to bond. If the pavement is wet or the forecast turns, the work is moved to a dry day.